
Hot Works Permit Software
A digital hot works permit that enforces the fire watch, checks the right extinguisher is at the work face and shows every live hot work on the site plan.
Hot works are one of the main causes of fire on construction sites, and the risk does not end when the torch goes out. SiteAssist turns the hot works permit into a controlled workflow: the right precautions are evidenced before work starts, and the fire watch is enforced after it stops.
At a glance
- Fire watch built into the permit, with durations that adapt to the risk.
- AI checks permit photos for fire extinguishers before the permit is issued.
- Extinguisher labels are read automatically and matched against the risk in your RAMS.
- Every hot works permit is pinned on the site plan, so clashes are visible.
- Post-permit checks confirm the area is safe before the permit can be closed.
Why hot works need more than a paper permit
Welding, cutting, grinding and torch-applied roofing all create ignition sources close to combustible material. Under the Regulatory Reform (Fire Safety) Order 2005, hot works have to be planned and controlled, and most procedures already call for a permit, a suitable extinguisher at the work face and a fire watch afterwards.
On paper, each of those can be signed off without being done. The extinguisher on the permit may not be the one at the work face, the fire watch may be cut short at the end of a shift, and nobody can see which hot works are live near other activities.
How SiteAssist controls hot works
Fire watch that cannot be skipped
The fire watch is part of the permit. Its duration is set by conditional logic, so higher-risk work gets a longer watch, and the permit cannot be closed until the post-work checks are confirmed.
AI checks on extinguishers
Photos attached to the permit are checked by computer vision for fire extinguishers. Labels are read by OCR and compared with the type the permit and RAMS call for, such as CO2 or powder. If something is missing or does not match, a warning is raised before the permit is issued.
Location and clash detection
A pin is dropped on the plan for each permit. Supervisors and the site office see live hot works next to other permits, so conflicts such as hot works beside flammable storage or a confined space entry can be spotted and resolved.
Hold points and approvals
Combustibles cleared, screens in place, detection isolated: each precaution can be a hold point with photo evidence. Approval is given by a named permit approver, and every step is timestamped.
Who it is for
Hot works supervisors, fire wardens, site managers and safety teams on construction, fit-out, utilities and facilities projects.
Frequently asked questions
What is a hot works permit?
A hot works permit is a formal authorisation for work that produces heat, sparks or flame. It confirms that combustibles are controlled, firefighting equipment is in place, a competent person has approved the work and a fire watch will follow.
Can the fire watch duration change with the job?
Yes. The duration is set by the answers on the permit, so it follows your procedure and insurer requirements.
See hot works permits in action
Request a demo using the button at the top of this page, explore the platform, or read the FAQ.

